Requirements For The Ground When Floor Decking Forming Machine Is Installed

It is important to select flat ground to set the machine when workers are ready to install steel deck roll forming machine. The condition of the ground will directly affect the installation, operation and use of the floor deck sheet roll making machine. Because the ground not only needs to bear the weight of the steel floor tile rolling machinery itself and the vibration generated during operation, but also absorbs and isolates the vibration generated in the workplace. If the ground does not meet the requirements, the ground will not be able to bear these forces, resulting in dip or sink , even destruction, which will cause the problem of running off.

Therefore, before the installation of floor deck roll forming machine, the ground should be checked strictly, and if there is a problem, it needs to be solved in time. The inspection contents include: the overall dimensions of the ground, the levelness of the ground, the center line, the elevation, the center distance of the anchor bolt holes, and whether they meet the requirements of the design and construction specifications. When the ground is partially too high, use a shovel to make it low.When the ground is partially too high, the original ground can be shoveled into flat ground , washed with water and then filled with concrete. When the center deviation of the foundation is too large, the position of the anchor bolt can be adjusted by changing it.Besides,all kinds of debris around the floor need to be cleaned up.

GEIT Group specializes in the production of all kinds of cold forming machine,including keel system machine,roof tile roll forming machine,rack system machine and so on. If you have any need to purchase machines, please contact with us. Looking forward to your letter.